Moffat GSC5062W Manual de usuario descargar pdf (Pagina 21)

GAS CONNECTIONS

Your cooker is delivered adjusted for the kind of

gas stated on the rating plate

If the appliance is supplied with natural gas and

the pressure for natural gas is 20mbar. The

following methods of connection to the gas

supply must be used:

Right Hand Connection (from front)

Ensure that the rubber hose is not in contact with

any part of the hatched area shown in the

diagram and that the loop of the hose when

connected is not in contact with the floor when

the appliance is in position.

Left Hand Connection (from front)

Ensure that the rubber hose is not in contact with

any part of the hatched area shown in the

diagram and the hose is retained in the clamp

provided, it will be necessary to fit the maximum

length hose when using this method.

Rigid Connection

Where it is not possible to make the connection

using a rubber hose, a rigid pipe work connection

must be used.

Recommendations when using an appliance

flexible connector are as follows:

- For NATURAL the gas installation pipes to the

termination point shall comply with:

Specification for installation of low-pressure

gas pipe work of up to 20mm (R1) in domestic

premises (2nd family gas) – BS 6891;

Connection shall be by means of an appliance

flexible connector for use with a self-sealing plug-

in device, complying with:

Flexible hoses, end fittings and sockets for

gas burning appliances – BS 669;

- The appliance flexible connector should not

be subjected to undue forces either in normal

use or whilst connected or disconnected; The

socket which the plug of the appliance

flexible connector fits should be permanently

attached to a firmly fixed gas installation pipe

and positioned such that the appliance

flexible connector hose hangs freely

downwards (see fig. 27);

- The appliance flexible connector should be

positioned such that it will not suffer

mechanical damage, e.g. abrasion from the

surrounding kitchen furniture, which may be

moved in use such as a drawer or door, or by

being trapped by any stability device.

The plug-in-connector should be accessible

for disconnection after moving the appliance.

BACK OF THE COOKER

power cord

connection

of flexible

hose

clamps

BACK OF THE COOKER

clamps

connection

of flexible

hose

power cord

Connection shall be by means of an appliance

flexible connector for use with a self-sealing plug-

in device, complying with:

Flexible hoses, end fittings and sockets for

gas burning appliances – BS 669;

Straight bayonet

socket

incorporating

spring loaded

valve

Cooker hose with

bayonet fixing

Cooker hose with

bayonet fixing

Alternative

backplate

elbow

Copper pipe

Adaptor

backplate

Right angled

bayonet socket

incorporating

spring loaded

valve

Distribuitor

pipe

Female

elbow

1 2 ... 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Moffat GSC5062W Manual de usuario Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Moffat GSC5062W