Moffat GSC5050WL Manual de usuario descargar pdf (Pagina 22)

23

CHANGE OF GAS

Your cooker is foreseen to work with G20 to

20 mbar.

Your cooker is foreseen to work with natural

gas, propane or butane. It is not foreseen

for butane or propane air.

For changing the gas type it is necessary to:

• replace the nozzles (hob, oven and

grill);

• adjust the minimum level (hob and

oven);

• adjust the primary air (oven and grill)

• check the gas connection

Replace the nozzles of the hob burners

Every appliance has spare nozzles for every

gas. The whole of every nozzle is marked in

millimeters on the nozzle.

Hob burners

- Remove the pan support;

- Extract the caps and the wall baffles of

the burners;

- Using a socket spanner 7 unscrew the

nozzles and replace them with those

required for the type of gas in use (see

table no. 1).

Reassemble the parts following the same

procedure backwards.

These burners don’t need any primary air

regulation.

Adjustment of minimum level for the

hob burners

The burner is well adjusted when the flame

is stable silent ant dies out without any

noise.

When changing the gas type check that the

minimum be correct. The air admission is

correct when the flame is about 4 mm

length.

The top burners do not need adjustment of

primary air.

Check that, turning quickly the knob from

the maximum position to the minimum one,

the flame does not go out.

1 2 ... 17 18 19 20 21 22 23 24 25

Comentarios a estos manuales

Sin comentarios